This section describes the setup flow for the SmartMat.
Initial setup is required to use the Smart Mat.
Please follow the steps below to proceed with the setup.
Initial setup is required to use the Smart Mat.
Please follow the steps below to proceed with the setup.
1. Confirm the button positions of the Smart Mat to be used for this setup.
Each size, as shown below (red circled area).3. If you are not using the network equipment provided by us, perform the initial Wi-Fi settings.
*If you are using our NW equipment, proceed directly to step (4).Click here for the text version of the procedure.
Press the button once again to confirm that the green light comes on at the end.
4. Check the Wi-Fi connection.
Press the button on the Smart Mat lightly, and if the lamp blinks green → lights green → turns off, the connection is complete.(If the light blinks green, turns red, and then turns off, the connection has failed.)
コメント
0件のコメント
サインインしてコメントを残してください。